It can be able to apply transfers, letters, numbers and images onto T-shirts, garments, bags, mouse mats, jigsaw puzzles, ceramic tiles, plates and other flat surfaced items. The digital timer control is adjustable up to 999 seconds. The heat press machine also features a digital temperature gauge ranging from 0 - 200°C (up to 399°F). The manual open and close handle is easy to operate and can be adjusted with the pressure knob at the rear of the machine.
Its industrial strength and durability allows for long-term use, making it a great investment with exceptional value amongst its competitors. Press "SET", the upper display will showing "SP", and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press?
(increase or decrease) to set the needed temperature. After setting well, please press "SET", the upper display will show "SK" to go on the next step for time setting Time setting. Press "SET" again, H1 LDE will showing "ST", then enter into the time setting. (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing).If the controller box showing nothing when power on, there are 2 solutions. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater.
If the display is normal, then maybe is the second situation of "b", the thread wire were disconnect. If still showing 3 line, then is the first situation of "a", the socket wire were fall out or break.
Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel, the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay. When power on, the controller box showing values but cannot heating up: the display showing the actual room's temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation "a", if cannot heat up, will be "b"situation.Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above "a", if nothing showing, please following "b" to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machine's function is ok, but cannot count down, then please press the third button, this machine will count down.
If still cannot count down, please replace the controller box. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. You can replace the heating plate easily and conveniently without using any special tools. Fahrenheit and Celsius scale are selectable.
Allows pressure to be more evenly distributed across the entire platen when it is closed. Built-in structural support to maintain flatness. Heating Plat Size : 12" X 10" / 30cm X 23cm. Time Range : 0 - 999 Sec.
Temperature Range : 0 - 399? Weight : About 30 lb / 13.5 kg. Package Size : 16x14.5x13 / 41.5x37x34cm.This swing-away 12" X 10" (30 X 23cm) heat press machine could transfer photos, words on cotton, fiber, metal, ceramic, glass and so on, suitable for producing gift, advertisement and so on. The Machine has a built-in Teflon coated 12" x 10" heat platen with a full range of heating coils to allow for consistency throughout its surface. Its unique swing-away feature allows you to rotate the upper heat platen 360 degrees around. By moving the heating element aside and reducing the chance of accidentally contacting the area of heat distribution, you can work more freely with your garments and transfers on the base plate. Unlike the traditional clamshell heat press machines, the heat transfer applies direct top-to-bottom pressure providing even contact with the surface below. The Machine also features a digital temperature gauge ranging from 0 - 200ºC (about 399ºF). Its industrial strength and durability allows for long-term use. The machine is CE certified. Heat Press Machine X 1. All items are dispatched from our warehouse in CA, NJ, AL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description.
We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that's why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return.Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses". The seller is "best-homepro" and is located in this country: US. This item can be shipped to United States.